500 Liters Horizontal Tank Type A

Designed and manufactured in DFM Co.

Horizontal plastic tanks, just like every other horizontal tank, are best suitable for places with height limits. Their Deformations are also less than vertical tanks when fully loaded. They are designed to have no water spillage in transportation.

The product, made of polyethylene, has some benefits listed as below:

  • UV resistant.
  • Usable outdoors and in almost every weather.
  • Every fluid from corrosive chemicals to drinkable water can be stored in it.
  • High tension and impact strength.
  • Damaged products are conveniently repaired.
مخزن آب 500 لیتری افقی تیپ یک- شرکت دوران فیدار مهام
مخزن آب 500 لیتری افقی تیپ یک- شرکت دوران فیدار مهام

مخزن آب 500 لیتری افقی تیپ یک

طراحی و ساخت توسط شرکت دوران فیدار مهام

مخزن آب 500 لیتری افقی پلی اتیلن مناسب جهت نگهداری آب شرب و یا مایعاتی است که با پلی اتیلن اختلالات شیمیایی ایجاد نکنند. این مخازن برای مواقعی که کمبود ارتفاع داریم مناسب اند. در هنگام نقل و انتقال نیز به دلیل طراحی مخزن، مایعات از آنها ییرون ریخته نمی شوند. به دلیل وجود پایه های طراحی شده در محصول، علاوه بر تسهیل حمل و نقل، نیاز به خرید پایه و نگهدارنده های جداگانه برای مخزن نیز وجود ندارد.

ویژگی های مخازن پلی اتیلن:

  • قابل ذخیره سازی آب شرب
  • عدم ایجاد اخلال شیمیایی با آب و سموم کشاورزی
  • مقاوم در برابر اشعه فرا بفنش (UV)
  • مقاومت شکنندگی بالا
  • ترمیم آسان
  • مقاوم در شرایط مختلف آب و هوایی (به دلیل ضریب انبساط و انقباض بالا)
مخزن آب 500 لیتری افقی تیپ دو- شرکت دوران فیدار مهام
مخزن آب 500 لیتری افقی تیپ یک- شرکت دوران فیدار مهام
مخزن آب 500 لیتری افقی تیپ یک- شرکت دوران فیدار مهام

This tank’s mold is fabricated from iron sheets. To fabricate a mold from metal sheets you must firstly model your product. The sheets should be sheared and shaped afterwards. Followed by welding the pieces together, they will be grinded and polished for the finest possible surface finish. As the final step, inserts, clampings, and the frame will be added.

Ever came up with a decent idea but struggled to get a commercial product out of it? We, at DFM Co. with more than 15 years of experience, will make sure that never happens. Alongside free business consultations and feasibility studies, our engineers will help you turn your ideas into reality. Firstly, a sketch or a model of your idea will be required. Then the design will be utilized and simplified. Followed by implementation of FEA (Finite element analysis), the product’s performance in real life conditions will be evaluated which helps preventing possible design failures and fixing the design’s flaws. The procedure is developed to be as cost efficient as possible by thorough analysis of the design in softwares before production. As the final step, after the customer’s and the supervising engineer’s approval, the mold will be manufactured and delivered to the customer.