Repair and modification of molds

Making all kinds of molds is our specialty. Darwan Fidar Maham Company has the ability to build, repair and modify molds in the best way with up-to-date equipment and experienced staff.

The process of repairing and modifying molds

to identify

Accurate identification of the type of mold, material and extent of mold damage, as well as the exact relationship between the welder and the supervising engineer.

cleaning

All areas to be welded for repair should be cleaned to prevent microscopic cracks.

Preheating (micro-tag)

Depending on the size and extent of the damage, if the mold is made of steel, it must be micro-tag welded, first preheating the part.

Welding the damaged area

By choosing the right welding wire and an experienced welder can achieve the desired penetration and welding with proper welding.

Reheat

After welding and turning the site and polishing the surface, the surface should be reheated to eliminate residual stress.

Final inspection

After the process of gradual cooling of the mold, the customer and experts carefully inspect the repaired place and after confirming the quality of the final mold, it is delivered to the customer.

Specialized section for making, repairing and modifying molds

Davaran Fidar Maham Company with 15 years of brilliant industrial experience and up-to-date and advanced machinery, as well as experienced and experienced staff can perform the process of designing, manufacturing, repairing and modifying your molds efficiently and in the best way. In the field of industrial molds, in addition to innovation, high quality and customer satisfaction, we have always put reasonable and affordable prices at the forefront.

Contact us to place an order or for a free consultation

Davaran Fidar Maham Company (Private Joint Stock Company)

contact us

دورانی

بادی

تزریقی