Services of Davaran Fydar Maham company
Unique services of Davaran Fydar Maham company
Invest Wisely
We help you select and prioritize projects based on financial and economic indicators. Our cost-benefit analysis includes identifying various project costs and comparing them with the expected benefits.
01.
Net Present Value (NPV)
Net Present Value (NPV)
02.
Rate of Return (ROR)
Rate of Return (ROR)
03.
Cost/Benefit Analysis
Profitability index
04.
Payback Period
Payback Period
Engineering, design and analysis of polymer tanks
At Davaran Fydar Maham Company, we turn your idea into a product, and we can also optimize your tanks and increase the lifespan and efficiency of your tanks by increasing the quality of national products to produce higher quality products.
We have the ability to make all kinds of molds for tanks and bulky polymer parts, and we can design the product you want and after analyzing and optimizing the tanks, we can also do the mold making process.
Engineering design of reservoirs
Our company consisting of engineers and specialists with 15 years of successful experience can help you to complete your idea and turn it into a workable plan.
Check performance in the environment
Always thinking for new ideas or upgrading and optimizing equipment can lead to the creation of a new and more efficient product or equipment. Everything starts with an idea.
Optimization of templates
We are proud to always have up-to-date production methods and experienced staff to make the product desired by the customer, and we have been able to turn the customer's idea into a product over the years.
Design and Analysis of Polymer Tanks
Designing Your Idea
Your tanks or products are designed and analyzed by our experienced engineers and designers.
Product Analysis and Optimization
We analyze and optimize your product to enhance its quality and performance.
Engineering Approval
After analysis and approval, the mold production and manufacturing process begins.
Engineering Design of Tanks
Our engineers and specialists bring you the highest quality by designing and manufacturing molds for polymer tanks and large-volume parts. We can design your desired product, analyze and optimize it, and then proceed with mold production.
to identify
Accurate identification of the type of mold, material and degree of mold damage, as well as accurate communication between the welder and the supervising engineer.
cleaning
All areas to be welded for repair must be cleaned to prevent microscopic cracks.
Preheating (Micro-Tig)
According to the size and amount of damage, if the mold made of steel must undergo micro-tig welding, we preheat the part first.
Welding the damaged area
By choosing the right welding wire and an experienced welder, she can achieve a good penetration and welding with the right welding.
reheat
After welding and turning the area and polishing the surface, the surface should be reheated to eliminate the residual stress.
Final inspection
After the gradual cooling process, the customer and the experts carefully inspect the restored place, and after confirming the quality of the final mold, it is delivered to the customer.